Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Need Help?

If you have any questions, or can't find what you are looking for: don't wait, we are here for you!

813-241-4900

DRYPOINT RS HP

High Pressure Refrigerant Air Dryers for up to 725 psig

RSHP Chart

1 Warm, moisture saturated compressed air is cooled down to +37 °F. The generously dimensioned heat exchanger enables particularly effective cooling, while the flow resistance is reduced to an absolute minimum.

2 Contrary to conventional systems, the movement of air through the heat exchanger follows a downward pattern. The effects of gravity produce an exceptionally high droplet separartion efficiency. In the large condensate collection space, the flow velocity is greatly reduced. Re-entraining of previously separated droplets is thus reliably prevented.

3 Before leaving the dryer unit, the dried, cold compressed air is reheated in an air-to-air heat exchanger. During this process, the relative humidity of the air is lowered considerably and the same time up to 60% of the cooling energy is recovered.

4 The separated condensate is discharged, without wastage of compressed air, from the DRYPOINT® RA refrigeration dryer into the level-controlled BEKOMAT® condensate drain. It can then be treated according to requirements, for example, in an QWIK-PURE® or ÖWAMAT® oil/water separation system or a BEKOSPLIT® emulsion splitting plant.

RSHP

Benefits

Aluminum Heat Exchanger

Vertical profile allows for minimum pressure drop and self cleans using gravitational force

Standard BEKOMAT® Drain

Reliable condensate discharge and maximum energy savings

Varioflow Hot Gas By-Pass Valve

Stable dew point regardless of varying operating conditions - patented design

Large Cross Section of Flow Channels

Low velocities, reduced power input

Maintentence Friendly

The compact design and open frame provides easy access to all components