DRYPOINT AC

Compact and Full Size Range of Heatless Desiccant Dryers

Flow-optimized CLEARPOINT® compressed air filters and an energy-saving compressor synchronisation control, which can be energized via optional software, reduce the costs. No regeneration air escapes from the system during the compressor downtime.

An adsorption dryer which is installed behind a receiver usually has larger dimensions in order to exclude overload in the compressor synchronization. DRYPOINT® AC – installed behind the receiver – is far more economical and safe as a result of our control system. The optional energy management automatically determines the delay time using the data acquired from the station. During this period, the dryer remains active. There is no risk of overload and the oversizing of components is unnecessary.

At the prefilter, a BEKOMAT® 20 FM drains off the condensate. Alternatively, the integrated solenoid valve may be used. The drying agent is contained in cartridges, immediately ready for use. Hence, the replacement of the drying agent is speedily and safely done. The drying agent is pre-stressed in the cartridge by means of a spring. This construction means:

• No function impairment as a result of bypass formation
• No early wear and tear as a result of drying agent abrasion, particularly at pulsating volume flows (piston compressor)

The cartridges are equipped with an integrated dust filter.

Function monitoring and control via an intelligent processor. Integrated features:

• power supply
• regeneration on the left-hand side/right-hand side
• solenoid valves and electronics
• potential-free contact with the fault-signalling indication in a control room

Fault signal on the display

Memory function: operating data will be saved during the breakdown of the supply voltage. Subsequent to re-activation, the drying cycle will be terminated in the operationally reliable mode.

Stable, defined compressed air quality is an important precondition for trouble-free, economic production process.

BEKO offers efficient components and systems for compressed air processing and transport for all kinds of requirements. This includes an extensive adsorption dryer program under the trade name DRYPOINT® AC.

DRYPOINT® AC is used where quality compressed air with a constant degree of dryness is consistently required. DRYPOINT® AC represents a real system solution: The inline integration of CLEARPOINT® compressed air filters, combined with BEKOMAT® condensate drains represent a major safety asset. DRYPOINT® AC compressed air adsorption dryers are available in two different production series. For the performance class up to 112m3/h (at 7 bar), you will find information to facilitate a decision and technical data in this brochure. The BEKO technical adviser will be happy to answer any further questions regarding both production series and compressed air processing using BEKO products.

EXTREMELY EASY TO MAINTAIN

The electronic control contains an integrated service module with an automatic service interval indicator and a PC interface for remote monitoring and troubleshooting.

Thanks to the cartridges, the replacement of the drying agent is effected easily and speedily – without disconnecting the compressed air line. Using BEKO's DRYPOINT® AC reduces service requirements by up to 75%, compared with conventional dryers.

EASY INSTALLATION

DRYPOINT® AC dryers are prepared for the most diverse range of installation and integration conditions (standard fittings). Broadband power supply for 100 – 240 VAC, 12 – 24 VDC, 50 – 60 Hz.

Symmetrical multiport distributor for a left-hand or right-hand side compressed air input.

Installation of the input filter at the side, in front of or behind the dryer.

The dryer may be mounted horizontally or vertically.

CUSTOM-MADE CONCEPT

DRYPOINT® AC dryers may be adjusted to altered operating conditions quickly and easily.

PC program for the monitoring and adjustment of the operating mode, including integrated energy management and an external alarm function.

Extensive CLEARPOINT® filter program.

Easy adjustment to modified pressures as a result of an easily accessible regeneration air jet.

Optional starting device.

The BEKO Dryer Range

BEKO's Product portfolio, a complete range of compressed air drying solutions for every application.

By supplying application specific solutions BEKO ensures customers receive personalized attention to their compressed air drying needs. The result is a system that will provide the most reliable, energy efficient solution possible.

Benefits

Significant Reduction in Operating Costs

Engineered for maximum purge air control and maximum energy savings

Highest Operational Reliability

Robust design with integral features to preserve maximum operational reliability

Easy to Maintain

Functional design features allow for simplified maintenance programs

Ssimple to Install

Compact and space saving framework can be moved with a forklift and even fits into corner spaces

Custom-Made Concepts Available

Our engineering and technical services department have the knowledge and expertise to provide you the optimum solutions